Specification desk: +1-800-555-0241 · Mon–Fri 8am–6pm ET ISO 9001:2015 · LEED Compliant Products · FM Approved

How to Order Shower Enclosure Glass: A 7-Step Purchasing Checklist

2026-09-22 · Tariq Mahmoud

Who This Checklist Is For

If you're responsible for ordering glass for a commercial bathroom project—whether it's a shower enclosure for a gym facility, bathroom tub glass doors for a hospitality renovation, or walk-in glass shower units for a multi-unit residential build—this checklist is for you.

I've been on the purchasing side of facility projects for the better part of a decade. Not the design side. Not the installation side. The side that has to actually order the thing and make sure it shows up on time, on spec, and at a price that doesn't get questioned by finance.

Here's what I've learned. Seven steps. Follow them in order.

Step 1: Define the Use Case Before Anything Else

The single biggest mistake I see buyers make is starting with price. Don't. Start with where the glass is going and who's using it.

A frameless glass door tub setup in a residential model unit has different requirements than a framed shower in a 24-hour gym. Different foot traffic. Different cleaning schedules. Different liability exposure.

Ask yourself three questions:

  • Residential or commercial? Commercial almost always means heavier glass and more durable hardware.
  • How many users per day? Under 10 vs. over 100 changes the spec sheet fast.
  • Who cleans it, and how? Some glass coatings tolerate chemical cleaners better than others.

Get these answers in writing from whoever requested the order. Trust me on this one. "I assumed it was residential" is not a conversation you want to have after the glass is installed.

Step 2: Confirm the Glass Spec (This Is Non-Negotiable)

Shower glass is safety glass. In the US, that means it must comply with ANSI Z97.1 or CPSC 16 CFR Part 1201. Both standards define impact and breakage behavior for architectural glazing in hazardous locations.

For shower and tub enclosures specifically, you're almost always looking at one of these:

  • Tempered glass — the standard choice. Typically 3/8" (10mm) for residential, 1/2" (12mm) for commercial.
  • Laminated glass — used when glass must stay in place after breakage, or where impact resistance beyond tempered is required.

Here's the part that trips people up: thickness and type are not the same thing as compliance. A vendor can sell you "3/8-inch tempered" that was tempered to a non-compliant standard. Ask for the test certificate. Not a verbal assurance. Not a spec sheet with no test report behind it.

"Per ANSI Z97.1, safety glazing materials must be tested and labeled as compliant. Verify current requirements at ANSI or CPSC directly if your project has specific jurisdictional requirements."

Write this down: no certificate, no order.

Step 3: Choose Framed vs. Frameless (and Know Why)

This is where the design people and the purchasing people tend to disagree. Let me save you the meeting.

Framed showers: Lower cost, easier install, more forgiving tolerances. The frame hides edge imperfections and small measurement errors. Good for high-traffic commercial where repair and replacement need to be simple.

Frameless glass door: Cleaner look, higher cost, unforgiving tolerances. Every edge is exposed. Every measurement has to be right. Hardware quality matters three times as much because there's no frame to absorb stress.

What about the in-between option—semi-frameless? It exists, it's popular, and it's usually the right answer for a bathroom tub glass door project where the client wants "modern" but the budget says "practical."

Here's my honest take: if you're ordering frameless glass shower panels for a facility, budget 40-60% more than the framed equivalent and expect installation complexity to go up accordingly. If that number surprises the requestor, you're having the wrong conversation.

Step 4: Spec the Hardware Separately (Most Buyers Skip This)

This is the step almost everyone skips, and it's the one that causes the most callbacks later.

Here's the thing about shower enclosures: the glass rarely fails first. The hardware does. Hinges sag. Handles loosen. Seals degrade. In a commercial setting, cheap hardware can mean a service call every six months.

When you're comparing quotes, make sure the hardware is line-itemed. Specifically:

  • Hinge material (stainless steel vs. zinc alloy vs. brass)
  • Finish (chrome, brushed nickel, matte black — matte black is popular but chips more easily in high-use settings)
  • Handle style and attachment method
  • Seals and sweeps (these are consumables — price replacement parts in advance)

If a vendor won't itemize hardware, ask yourself what else they're bundling into a single number. Put another way: an opaque quote is a red flag.

Step 5: Check Local Code Requirements

National standards set the floor. Local code can raise it.

Most US jurisdictions follow the "hazardous locations" rule for glazing: glass within 60 inches vertically and 36 inches horizontally of a walking surface or tub edge generally needs to be safety glass. But specific interpretations vary. Some jurisdictions add requirements for ADA-compliant shower enclosures in commercial facilities—different door widths, different swing clearances, different thresholds.

Call the local building department before you place the order. Yes, it's tedious. Yes, it's saved me from at least one failed inspection.

If the project is international, the standard changes entirely. EN 14428 covers shower enclosures in the EU. Don't assume a US-compliant spec travels.

Step 6: Compare Quotes on Total Cost, Not Unit Price

Here's where I stopped being naive.

In 2021, I found a supplier quoting $22 per square foot less than our regular vendor on shower enclosure glass. Looked like an easy $1,800 savings on the project. I ordered it.

The glass arrived four days late. Two panels were dimensionally off by a quarter inch—enough to fail install. The vendor wouldn't take returns. We paid for re-templating, expedited shipping on replacements, and ate a two-day schedule delay on a facility opening.

Saved $1,800. Ended up spending $3,200 on the recovery. Net loss: $1,400, plus internal credibility.

Now I calculate total cost before comparing any vendor quotes. The line items look like this:

  • Glass cost (per panel, not per sq ft — panels are what you actually order)
  • Hardware and seals
  • Packaging and crating
  • Shipping (including any lift-gate or inside-delivery surcharges)
  • Sales tax / duty
  • Expected installation adjustment time
  • Risk adjustment for lead-time variance and rework probability

The last two items are guesses, I'll admit. But even rough numbers change the comparison dramatically. That's the whole point.

Step 7: Verify the Supplier Before You Commit

Before the PO goes out, verify four things:

  1. Compliance documentation. Test certificates for the specific glass type ordered.
  2. Prior commercial projects. Not just "we supply hotels" — ask for two or three specific project references.
  3. Lead time in writing. Not "about four weeks." A specific date.
  4. Invoicing and returns process. Fixed pricing, proper invoice format, written return/defect policy.

So glad I started doing this systematically. Almost placed a six-figure order with a supplier who turned out to have no formal invoicing setup—which would have meant finance rejecting the expense and me explaining why the materials were already installed.

Common Mistakes to Avoid

A few final reminders, drawn from things I've personally watched go wrong:

  • Don't accept verbal "tempered" claims. Ever. Get the certificate.
  • Don't measure once. Measure twice, with a second person verifying. Dimension errors are the single largest source of rework.
  • Don't ignore shipping conditions. Glass crates need proper bracing. A quote that "includes shipping" but doesn't specify crating method is a quote with hidden cost.
  • Don't skip the hardware clause. If hardware replacement costs aren't documented, they'll surprise you later.
  • Don't finalize the order on a Friday. Sounds silly. But if something needs changing, you've lost two business days.

Bottom line: ordering shower enclosure glass is not complicated, but it's easy to rush. The seven steps above take maybe a half day of work on the front end. That half day saves weeks on the back end.

Tariq Mahmoud
Tariq Mahmoud

Tariq Mahmoud is a plumbing and fixture analyst specializing in water-supply pipe, drainage systems, valves, faucets, sinks, toilets, shower hardware, and kitchen and bathroom fittings. He distinguishes ASME A112.18.1/CSA B125.1 performance requirements from NSF/ANSI/CAN 61 health-effects criteria while checking pressure, flow rate, leakage, operating torque, temperature limits, connection dimensions, and potable-water contact. His selection guides help engineers and developers compare code relevance, material compatibility, maintenance access, and documented performance for each installation.